Floor Decking Roll Froming Machine

Floor Decking Roll Froming Machine Product DetailsIntroduction
Series floor decking forming machine consists of uncoiler and its base, coil sheet guiding equipm

Floor Decking Roll Froming Machine Product Details

Introduction
Series floor decking forming machine consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, post-cutting equipment, hydraulic station, controlling system, supporter table. The corrugated profile sheet produced by this machine has high strength with big rib, which adheres well to concrete. It’s best to be used as the floor of high buildings, and the cost of such floor is low.

Standard Equipment of Machine
Passive uncoiler 1pcs
Guiding equipment 1set
Rolling forming equipment 1set
Embossing equipment 1set
Post-cut equipment 1set
Hydraulic station 1pcs
PLC controlling desk 1pcs
Supporter table 2pcs

Technical Parameters

Item NO Description Offered specification
1.0 Roll Forming Machine YX51-334-1002, the profile as the drawing
1.1 Material width Galvanized steel sheet & pre-painted steel sheet up to 235mpa to 345Mpa, 1250mm width
1.2 Rolling Speed 15-20m/min(not include cutting time), normal 18meters/minute
1.3 Rolling Thickness 0.75-1.2mm
1.4 Control System PLC & Transducer(Mistubishi)
1.5 Un Coiler 5tons hydraulic un-coiler
1.6 Roller Stations 33 stations
1.7 Roller Material 45#forge steel, coated with chrome in 3~4um, all rollers are made by CNC and heat treatment
1.8 Shaft Material and DIA ¢80mm, material is 45# forge steel, all shaft after lathe machining using grinding machine to grind and heatment
1.9 Main Motor Power 22kw (two motors, each in 11kw)
1.10 Cutting Way Hydraulic cutting 
Including Pressing the two heads 
Of the panel to make the crimping
1.11 Cutter Material Cr12 Mold steel material with quench HRC58-62°with quench, and heat treatment
1.12 Hydraulic Power 7.5kw
1.13 Type Of The Stations Wall panel, thickness in 20mm
1.14 Tolerance 10m+-2mm
1.15 Power Source 380V, 50HZ,3 phase,
1.16 Way Of Drive 45# forged steel with frequency quenching, 16A
1.17 Color Of The Machine Mist Green
1.18 Size of the machine L*W*H 26m*1.5m*1.5m
1.19 Cutting total frame 45#, but will be heat treatment in frame shape to add rigidity and tenacity
1.20 Embossing rollers 2 sets, the rollers are made by Cr12 Mold steel material with quench HRC58-62°with quench, and heat treatment
1.21 Transmission By chain
1.22 Cutting total frame 45#, but will be heat treatment in frame shape to add rigidity and tenacity

Get contact